Autodriver not Loading from Auger/Conveyor/Belt

[DeltaFiveNiner]

Auto Drive will not load from Auger/Conveyor (Belt type) to load trailer from silo.
Using ingame AGI Westfield Augers or Batco Conveyors.
Driver will drive to point, stop at waypoint, but will not load.
Have to hop into Auger/Conveyor and manually start loading before autodrive will resume route.

[Iwan1803]

Maybe it's a problem of the conveyer belt? Does it overload automatically if you drive under the belt?

[Axel32019]

Do you have automatic motor start enabled?
I assume the Auger/Conveyor stop the motor if you leave them and so could not load.

[DeltaFiveNiner]

Apologies for the delay in responding, was away from my computer traveling. I've attached a video of my situation.
The auger motor is running.
Driver approaches auger, removes trailer covers, and then pulls under auger. Action Text to Start Filling appears, but driver never loads trailer.
https://www.youtube.com/watch?v=Hg2jl61syFk

[Axel32019]

Are you able to load the truck completely with the selection of load good "canola" from inside the truck manual?
I am not able to do so, I have to select the fill with the auger and start the loading process.
When try inside the truck it loads ~2500 and stops - looks like a buffer of the auger.
From my understanding the control of the load process is not from the truck, only possible from auger.
That's why AD is not able to load in this situation - if possible in future is questionable...

[DeltaFiveNiner]

When I saw your post I wanted to disagree because that didn't seem right based on past experience, but I wanted to get in game first to confirm.

So when I first tried to load the truck manually, it did as you said, only loaded to 2500 and stopped.
I then got out, went to the auger and resumed filling.
NOW, when I pulled ahead and filled manually from the truck, it continued to fill past the 2500 until the hopper was full.
I was then able to fill the next hopper in the same way as well, so there seems to be some interesting things going on in the game here.

https://www.youtube.com/watch?v=ZxAJ5FvVhBM

I'm going to try experiment some more and see if I can find a way to utilize Autodrive after manually filling the first hopper.