Support Wanhao Duplicator 9 (D9)

[andrivet]

Thank you for submitting your feedback to the ADVi3++ project.

Please be sure to review the checklists below before submitting and use one of the templates.

It is mandatory. If you do not comply with these rules, I will delete your issue.

• This issue is NOT about support. This is not the right place for support (there is an ADVI3++ Facebook page for that)

---

Feature Request

• Your request is not specific to your setup but can benefit to many people
• You have checked that you are not creating a duplicate of an existing (maybe closed) request (use the search)
• You have provided a short but meaningful title
• You have provided enough information (such as links to web sites, blogs, technical description) so that anyone can understand what you are talking about. Just any only a title is not enough.
• You have provided objective facts, not your personal feelings, your personal preferences.

Note: It is no more necessary to add "[FR]" in the title. You can, if you want, label your issue with "enhancement".

Detailed description of the feature request:

The Wanhao Duplicator 9 (D9) hardware is very close to the hardware of the Duplicator i3 Plus Mark II. In particular, it uses the same kind of LCD panel. It seems thus possible to support this printer.

[andrivet]

Sources:
https://github.com/JeremyProffitt/Marlin-Wanhao-D9-300

[taxilian]

Updated source: https://github.com/garychen99/D9/blob/master/D9%20300%20V0.164(B).zip

I would be interested in helping with this if possible; I have experience building marlin from source, configuring for a new printer, and some experience with arduino development; I'd need help and pointers, but I'm willing to contribute some time, definitely can test, and can hopefully help with some code if someone can point me in the right direction. I'm also willing to do a patreon donation if it'll help this happen but I'd like to know what is going on before committing financially =]

[andrivet]

@Split7fire No support here.

[andrivet]

@Split7fire until i release version 4, only here: https://www.patreon.com/andrivet